Tag: Waterproofing Tips

Waterproof Vs Water Resistant Boots: 6 Key Differences

We’ve all seen people using the terms ‘waterproof’ and ‘water-resistant’ interchangeably. But are they really alike? When it comes to comparing footwear, we need clarity.

The basic difference between waterproof vs water resistant boots is that you can submerge waterproof boots in the water without damaging them whereas water-resistant boots will only endure moisture to a certain level.

It’s not simple to explain the difference in those words. So, let’s dive a bit deeper.

Waterproof Vs Water Resistant Boots: What Do They Mean?

There are several differences when we are comparing these two types of boots. But first, it’s important to get our basics right. The term water resistant refers to when something can withstand water to a certain level. For instance, water-resistant boots are protected from water if it’s lightly raining, or water splashes on them.

However, you cannot submerge water-resistant boots into the water. These boots go through a test before they are labeled as water-resistant. The test determines how much water it can withstand before it leaks inside the boots. The amount of water pressure that can label a shoe as water-resistant is 200 mm.

Waterproof boots, on the other hand, can withstand water even if you submerge them in the water. They are usually made of different materials and cost more than water-resistant boots.

Not understanding the difference between these two terms is what creates disappointment. When something is advertised as water resistant and they don’t perform well when they’re entirely submerged in the water, people tend to get disappointed.

Nevertheless, you need to understand that there’s a limit to which a water-resistant product can withstand the effect of water. So, make sure you’re paying extra attention when choosing anything labeled as water-resistant and waterproof.

Waterproof Vs Water Resistant Boots: 6 Basic Differences

The terminologies are not the only thing that differs from one another in this case. There are some significant differences between waterproof and water-resistant boots. Let’s take a brief look at them.

Aspect	Waterproof Boots	Water-Resistant Boots
Material	Nylon, waterproof fabrics, leather	Canvas, leather, rubber with coating
Price	Usually more expensive	Generally more affordable
Breathability	Less breathable due to non-porous materials	More breathable
Effectiveness	Long-term protection from moisture and water	Short-term protection from moisture
Durability	Withstands harsh weather, lasts longer	Less durable than waterproof boots
Insulation	Better insulation, retains heat	Less effective insulation

Waterproof Vs Water Resistant Boots Basic Differences

Material

Water-resistant boots can be made of canvas, leather, or rubber. Regardless of what material is used, there is usually a protective coating that makes the boots water-resistant.

Waterproof boots are usually made of nylon, waterproof fabrics, or leather. The outsole of waterproof boots can feature rubber, polyurethane, or neoprene. These materials are non-porous, making them perfect for the waterproof feature.

Price

As you can guess, waterproof boots are usually more expensive than water-resistant ones. So, if you are thinking about getting a waterproof pair, make sure to keep your budget higher than usual.

Breathability

Water-resistant boots are certainly more breathable than waterproof boots. Even with the coating that makes a pair of boots water-resistant, these boots are usually a lot more breathable compared to waterproof boots.

The non-porous materials used for making waterproof boots prevent water from getting water inside the shoes. As a result, the breathability of the boots get affected

Effectiveness

Both boots come with some upsides and downsides. Which one is better for you depends on the purpose. If you need a pair for long-term protection from moisture and water, it’s better to invest in a pair of waterproof boots.

On the other hand, if your primary concern is breathability, price, and short-term protection from moisture, water-resistant boots will be a better choice.

Durability

Waterproof boots win this round with flying colors. Because of their waterproof feature, they can withstand harsh weather and last longer than water-resistant boots.

Insulation

The waterproof materials also come in handy when you’re in search of better insulation. Heat can’t escape and air can’t enter waterproof shoes, making them stronger against temperature.

So, if it’s freezing cold outside and you want your feet to be warm, waterproof boots will certainly perform better than water-resistant boots.

Advantages Of Waterproof And Water Resistant Boots

Let’s summarize what advantages you will get if you go for any of these boots.

Advantages	Waterproof Boots	Water-Resistant Boots
Protection	Provides highest protection from dirt and water	Provides a level of moisture resistance
Insulation	Offers improved insulation, keeps feet warm	More breathable, comfort for longer periods
Styles	Available in wide range of styles	Lightweight, stylish design
Longevity	Typically lasts longer than many other boots	Often comfortable
Water Submersion	Can be submerged in water without damage	Suitable for most situations, slip prevention
Versatility	Suitable for various weather conditions, all-season choice	Easy to clean, versatile
Affordability	Comparatively higher cost	Generally more affordable
Slip Prevention	Can offer better grip	Helps prevent accidental slips
Comfort	May be less breathable, depending on material	Often more comfortable than some other boot options
Moisture Prevention	Keeps feet dry and prevents moisture	Provides a level of moisture resistance to keep feet drier

Advantages Of Waterproof And Water Resistant Boots

Waterproof Vs Water Resistant Boots: Which One Is Better And Why?

Aspects	Water-Resistant Boots	Waterproof Boots
Price & Breathability	Win in terms of price and breathability	May have a higher price, less breathable
Insulation & Durability	May have less insulation and durability	Offers better insulation, durability against water
Weather Consideration	Suitable for light moisture, drizzles, and splashes	Essential for heavy rain, muddy areas
Suitability for Activities	Suitable for walking, hiking in various conditions	Necessary for heavy rain, mud-prone activities
Long-Term Investment	May be a more economical choice initially	Ensures shoes remain unaffected by water over time

As you can understand from today’s discussion, the better choice could be any one of them depending on what you are looking for. When you’re comparing these two options based on price and breathability, water-resistant boots will certainly win.

On the contrary, if you are concerned about insulation, durability, and keeping the shoes unaffected by water, waterproof boots are the ones you should invest in.

It’s smart to think about the weather and the purpose before buying a pair. if you work indoors and don’t want to spend a lot of money on your shoes, water-resistant boots will do fine.

They can excellently withstand light moisture, drizzles, and splashes. You can walk and hike easily wearing water-resistant shoes.

Nevertheless, if you visit somewhere muddy on a regular basis, or it rains heavily in your area, it’s very important that you invest in a pair of high-quality waterproof shoes.

Initially, the price difference between these two options may make you think that it’s better to get a pair of water-resistant boots.

However, if you ruin your shoes with water, there is no use in saving that small amount of money.

Final Words

There you have it. The detailed differentiation between waterproof vs water-resistant boots. If you are about to buy a new pair of boots, it’s smart to get your facts straight.

No matter how much someone says waterproof and water-resistant boots are the same, they are not. Now that you know what to measure to differentiate these two, you can be a better buyer without spending your money in the wrong place.

References

https://www.overlookboots.com/blogs/boots/waterproof-vs-water-resistant-vs-water-repellent-boots-what-is-the-difference
https://www.vionicshoes.com/blog/whats-the-difference-between-waterproof-and-water-resistant-boots/

August 20, 2023

How To Waterproof Your Electric Scooter: 7 Advance Techniques

As functional as electric scooters are, they come with some limitations. For instance, even high-
end scooters won’t be waterproof. They might be water-resistant to some extent. So, how to
waterproof your electric scooter?

Along with investing in a scooter with a good IP rating, you can also take other measures to
improve the waterproof feature of your scooter. For instance, applying sealants, taping
exposed parts, extending the mudguard, drying your scooter after using, getting a waterproof
bag for the scooter, etc.

These techniques certainly require a more detailed look. Before getting to that, let’s clear some
basic topics.

Waterproof Vs Water Resistant

Many people confuse these two terms and assume that they’re the same. That couldn’t be far
from the fact. In reality, there are no waterproof electric scooters. Because the term
waterproof means when something is entirely secured against water, even when it’s entirely
submerged.
Water resistance, on the other hand, means that something is protected against water to some
extent. For instance, vertical water drops, spills, etc.

To better understand the difference between these terms, you can read our comprehensive guide on the difference between waterproof and water resistant, which clarifies their distinctions and helps you make informed decisions about protecting your electric scooter.

Understanding the IP Rating Of Your Electric Scooter

Every electric scooter will come with an IP rating. You will see two numbers after IP. These two
digits indicate how protected your scooter is against objects and liquid. So, you have to pay
attention to the second digit which indicates liquid. This will give you an idea of how water-
resistant your scooter is.

IP Rating	IP Rating Description
IPX4	Splash resistance from all directions
IPX5	Low-pressure water spray resistance
IPX6	High-pressure water spray resistance
IP54	Water spray resistance from all directions
IP55	Low-pressure water spray resistance from all directions
IP56	High-pressure water spray resistance from all directions
IP57	15 cm to 1-inch immersion resistance

5 Basic Tips To Follow

There are a few things you can follow as basic guidelines when using your scooter. While these
aren’t the most advanced techniques, they’ll certainly make sure that your scooter does not
become damaged by the simplest uses.

waterproofing tips for Your Electric Scooter

1. Avoid Folding A Wet Scooter

You may need to fold your scooter during your travel. However, if the weather is bad and the
scooter is wet, avoid folding it. Try to transfer it without folding it.
When a scooter is wet, water can get inside sensitive components if you fold it. So, one golden
rule of thumb is not to fold a wet scooter.

2. Get A Waterproof Carrying Bag

When you’re in public transport, and carrying your scooter, it’s safer to use a waterproof bag.
This keeps your scooter protected when you are carrying your scooter during bad weather but
not using it at that moment.

3. Dry Your Scooter After Using

It can sound annoying to dry your scooter after each use. However, it can protect your scooter.
Avoid using a hairdryer to do this. The hairdryer can push water droplets from the surface
inside the sensitive components.
Instead, you can simply use a cloth or a wet-dry vacuum cleaner.

4. Avoid Bad Weather

It may sound obvious but avoid taking your scooter outside in bad weather as much as possible.
If that’s not an option for you, make sure to invest in a good quality waterproof carry bag for
your scooter.

5. Pay More Attention To Avoid Mishaps

Small accidents and slips are very common with electric scooters. It becomes more dangerous
for you and your scooter when the roads are slippery or muddy. So, choose your roads wisely.
Avoid going through roads that have holes.
Invest in a pair of good-quality shoes and gloves to avoid slipping.

How To Waterproof Your Electric Scooter: 7 Advanced Techniques

Now, let’s move on to more advanced techniques. This will require you to customize your
scooter. Note that if your scooter is still under warranty, some of these steps will breach the
warranty conditions. So, be careful before making any adjustments, and don’t forget to read
the user manual.

1. Spray-Ons

You will find spray-on waterproof products for your electric scooters. These come with some
advantages and disadvantages. On the plus side, they are super-easy to use. On the downside,
they only last a few months. In addition, you have to re-apply them each time you wash your
scooter.

For a convenient solution, you can try using high-quality spray-on waterproof products like the Gorilla Waterproof Patch & Seal Spray, which I personally use and recommend.

It offers easy application and can provide temporary protection for your scooter.”

2. Sealants

Sealants are more complicated to use but also more durable. You can use sealants for the
exposed components of your electric scooter. Even though these components come with some
protection against the water, using a sealant will certainly bump up the barrier.

For the best results, consider using a high-quality waterproof sealant, like the ones recommended here, to ensure optimal protection for your scooter’s exposed parts.

3. Lengthen The Mudguard

Sometimes the mudguard falls short of protecting your scooter. In these cases, you can get an
extension for the mudguard. If you only wish to lengthen the guard a bit, you can also use tape
to do so.

4. Tape The Charging Port And Deck

When riding during snow or rain, make sure to use duct tape for covering the charging port and
deck to give your scooter another extra layer of protection. Make sure all gaps are closed using
the tape. It’s recommended that you use good-quality waterproof tape to do so.

5. Install O-Rings

This will require you to disassemble your scooter. Open up the scooter and find the holes and
install o-rings on them. This will make sure that water doesn’t seep through the holes.

6. Protect The Throttle

Many electric scooters come with a high-quality throttle that does not need any extra
protection. However, if your scooter doesn’t have a high IP rating, you can use adhesive over

the throttle. This can hinder the use of the part. Another DIY way of doing it is wrapping a
balloon over it.
But the best solution remains a waterproof throttle. So, you can also replace the existing one
with a new one.

7. Grease Your Wheel Axles

Using grease for your motor axles has two benefits. One of them is enhanced performance and
another is water protection. It will work as a protection barrier for the parts of your scooter.

Conclusion

You will find a lot of tips on how to waterproof your electric scooter. But all of them may not be
suitable for your scooter. So, the first thing to do is to know your scooter by reading the manual
and warranty condition.

Then, follow the basic rules as much as possible to keep the unit protected. As for making it waterproof, you can use the advanced techniques mentioned here to lengthen your electric scooter’s lifespan a bit more.

References:

1.https://sxcscooters.com/pages/https-sxcscooters-com-pages-waterproof-your-electric-scooter
https://unagiscooters.com/scooter-articles/waterproofing-techniques-for-electric-scooters/
https://waterproofwiki.com/how-to-waterproof-your-electric-scooter/?utm_content=cmp-
true

https://scooter.guide/how-to-protect-your-scooter-from-water-damage/
https://www.kaabousa.com/blogs/blog/how-to-make-your-electric-scooter-waterproof

August 3, 2023

How To Waterproof Mdf In 5 Steps
Medium-density fiberboard or MDF is a very versatile product and you can get your hands on it at a very low cost.
As a result, I used this board for some shelves, floors, furniture, and kitchen cabinets in my house.

Then I was worried about protecting them because I live in a high-humidity area. And moisture or water contact can easily damage this MDF.

However, in the meantime, I was able to ensure the safety of my items. I secured the boards by waterproofing them. you just need to select a waterproof product and move on.

So let’s see the details process.

How to Waterproof Mdf

Follow the complete guide on how to waterproof MDF. and in just 5 easy steps waterproof your boards.

Step-1: Gather the required ingredients
- Paint brush
- 3/8-inch paint roller cover
- Roller tray
- Latex primer
- Moisture-resistant paint or varnish (that is labeled 100% capable of providing water-resistant protection)
Step-2: Prepare the MDF

The first thing you need to do is thoroughly clean the MDF board to waterproof it.

Take a clean wet rag and wipe the surface of the board thoroughly with the rag. make sure there is no debris left on it before you move on to the next step.

Step-3: Apply Primer to The Surface

The medium-density fiberboard is now ready for waterproofing. At this stage, shake up the sealer or primer and pour it into a paint tray as needed. Take a 3/8 inch roller, and dip the roller into the tray.

This time coat the board with the roller. Apply an even coat of primer to the board. Pay special attention to edges, notches, and screw holes. Use a paint brush to apply the primer to the edges. Make sure the entire MDF is covered with primer.

Follow the manufacturer’s instructions for drying the primer, but generally, the primer will take 4-6 hours to dry.
Before proceeding to the next step, make the paint brush and roller suitable for paint application by washing them thoroughly.

Step-4: Apply Paint to The Board

Take water-resistant paint and paint the MDF edge with a paint roller. Just the way you applied the primer to it. apply paint to each corner of the board with a paintbrush.

You will need to apply one more coat of MDF, so let the first coat dry well. Usually, the paint takes 4-5 hours to dry.

Now when the board is dry apply another coat of paint. This will make your MDF more moisture-resistant.

Step-5: Dry the Fiberboard Thoroughly

At this stage, the board should be thoroughly dried to make it suitable for outdoor use. we recommend you apply multiple coats of paint, mainly to make it highly moisture-resistant.

What Is the Best Way to Waterproof Mdf?

If you want to consider a simple and cheap solution for waterproofing MDF then I recommend you choose PVA glue or shellac products.

But if you want to make the MDF highly moisture-resistant, then using waterproof latex or epoxy paint on the MDF board is the most effective way. But this process is somewhat expensive. Also applying a primer coat and waterproof paint is the best solution.

Now you decide which product you want to use to make the boards water-resistant.

Conclusion

In this article, I am really glad to share my experience with you. For those of you looking for a solution to protect mdf, they feel free to waterproof the boards.

Above, there is a complete solution guide for waterproofing fiber-board, following this method, and securing your item.
September 11, 2022
Wash Your Waterproof Jacket in 5 Simple Steps

In order for waterproof gear to be long-lasting, it needs proper care. Because purchasing a waterproof jacket or pants is an expensive investment.

And an owner certainly doesn’t want their waterproof gear to be damaged due to lack of thorough maintenance.

However, some mistakes on your part can cause waterproof items to lose their waterproof coating or damage the fabric. Hence proper care is required to protect these items. And you can wash your waterproof jacket in just a few steps.

So, without further ado let’s see how to wash a waterproof jacket.

How to wash your waterproof jacket

Manufacturers of waterproof gear usually provide detailed information on how to care for their products. Therefore, you should follow the procedures they provide to ensure optimal care and help prevent damage.

However, below you will find a step-by-step guide to washing your waterproof jacket.

Step-1:

Open all the pockets in your jacket, and remove the items inside the pockets. Open its zippered pockets, but keep the main zipper, collar zipper, and hems closed. Be sure to close the velcro flaps.

Step-2:

Choose detergents specifically designed for cleaning waterproof gear. A common mistake most people make in this regard is to use a normal laundry detergent to clean waterproof gear. And it should not be done at all.

A proper detergent will protect your product from damage and help maintain waterproof properties. Remember not to choose any ordinary detergent to wash your waterproof gear.

This is because common detergents erode the DWR coating on waterproof gear. So consider a detergent that will keep the membrane pores clean.

Step-3:

Throw your waterproof or ski/snowboard jacket or pants in the machine. Remember not to combine your waterproof gear with any other common items. If you want to wash two jackets, make sure both are waterproof.

Step-4:

Set your machine. Many machines usually have a setting for washing waterproof gear. If your machine has this special setting, Set it. otherwise set it to the setting for washing silk, synthetic, or wool fabrics.

You can also set it manually. Make sure the machine temperature does not exceed 40 degrees, as high heat damages the fabric. Add your chosen detergent, and run the machine. Run it for at least 30 minutes.

Step-5:

Take your waterproof jacket out of the machine and hang it to dry. Avoid direct sunlight to dry it.

How to re-waterproof your jacket

Once your waterproof jacket is thoroughly dry it may need to be re-waterproofed. Because waterproof gear can lose its waterproof properties. So it is a good idea to re-waterproof it. So you must take this step to regain the DWR coating.

Step-1:

First of all, you need to make sure that your jacket or pants are completely dry now. And you have been able to clean it well. So now choose a ventilated place and hang it on a hanger.

Step-2:

Get a good quality waterproofing spray. Spray a thin coating of this spray DWR on your jacket or pants. You can get an idea of how much spray to use from the product instructions.

Step-3:

Once the item is well coated at this stage, let it dry. You can apply another coat if needed.

Step-4:

Now you can test the DWR of your jacket. To do this, throw water on the jacket. what can you see? If the item starts to get wet, the DWR treatment is considered useless. And if it doesn’t then you’re welcome, your jacket’s waterproof treatment has been successful.

Conclusion

Generally, after a certain period of time waterproof gears can lose their waterproof properties. As a result, they should be re-waterproofed.

And we’ve also given ideas on how you can re-waterproof the jackets. Ensure proper care of a waterproof products and make them last longer.

September 8, 2022
How To Make Waterproof Stickers [All Methods Included]
Many people including me love to do art and craft work. Needless to say, stickers are an excellent form of artwork. Many know that they should make their stickers waterproof.

But, how to do that? In this article, I will discuss how to make waterproof stickers. Want to know more? Read on!

How to make waterproof stickers at home

Materials you need:

When it comes to making waterproof stickers at home, you must use the right material. Now, there are plenty of options from which you have to choose the right one.

Remember one thing, if you don’t choose the material wisely, your entire sticker project can be ruined. Typically, I need the following materials to get the job done perfectly.

1. Sticker Paper:

The next thing you will require is sticker paper. You will easily find waterproof, matte sticker papers which are printable and compatible to work with most of the popular cutting machines.

2. Printer:

You will also need a printer to print your stickers. Don’t become a fool by buying a low-quality printer. Check the quality of the printer before making the ultimate buying decision.

3. Laminating Sheets:

You want to protect your valuable stickers, right? That’s why you will need laminating sheets for creating an extra layer of protection for your stickers. Always use self-adhesive laminating sheets for better performance.

4. Thermal Laminating Machine:

Another piece of equipment you may need is a thermal laminating machine. Check the features and advantages of the thermal laminator before buying it.

5. Aerosol-Based Spray Sealant:

You may also need an aerosol-based spray sealant to make your stickers waterproof.

5. Cutting Machine:

First of all, you will need a DIY cutting machine for art and craft cutting. These machines are specially designed for giving you a precision cut for artists, designers, and crafters.

Many models of DIY cutting machines from different brands are easily available in the market. So, you should choose carefully when buying a new cutting machine.

6. Wax Paper:

You will also need wax paper to make waterproof stickers without sticker paper.

7. Tape:

Finally, you need packaging tape when you don’t use sticker paper.

How to Make Waterproof Stickers with Sticker Papers

Everybody will agree that making stickers waterproof is quite important. Especially, if you want your stickers to last longer, you must make them waterproof in the correct manner. Now, there are three major ways to make waterproof stickers at home which are as follows-
- Method 1- Using a self-adhesive laminating Sheet
- Method 2- Using a thermal laminating machine
- Method 3- Applying a Sealant
Continue reading to know about the steps you need to follow in each method.

Method 1- Using Self-Adhesive Laminating Sheet:

To make waterproof stickers in this method, you can follow these simple steps.

Step-1: Create an Illustration

You can start the process by creating an illustration. If you are a DIY enthusiast, I believe you would like to make the illustration on your own. When making the illustration, you should make it large in the first place.

If you do so, in a later stage, you will have more rooms to resize. To DIY at this stage, you need to have a good design sense. After making the illustration properly, you need to remove the background and save the file in png format. Even if you download an image, you must save it in png for better output.

Step-2: Make the illustration Print Ready

This step is quite important. Because in this step, you need to finalize your illustration and make it print-ready. There are a couple of ways to do that.

I suggest editing your illustration in Adobe illustrator. Do all the necessary editing staff in the illustration to complete your designs so that you can print them on the sticker paper.

Alternatively, you can use the Cricut design space for designing your stickers. In that case, firstly, you will have to upload the image to the canvas of the Cricut design space. Then, you will need to do the necessary design work to make your image or sticker print ready.

Although the entire process of Cricut might seem quite challenging to you, if you know the techniques, it’s not that struggling.

Step-3: Do the Printing

At this point, you will need to print the stickers. Now, there are several printers you will find in the market. But, But, always try to use the best printers for vinyl stickers for better output.

Here, my recommendation is Epson WorkForce WF-7710 Wireless Wide-format Color Inkjet Printer (view on Amazon). This printer will allow you to enjoy rich, vibrant, and professional printing every time.

To complete the process, you need to use sticker papers. However, most sticker papers are ultimately made of paper. That’s why they will absorb moisture in most cases.

Keeping that in mind, my recommendation is this excellent printable vinyl Sticker Paper which is impervious to moisture. This paper will work perfectly to print stickers. But, it will work only with vinyl inkjet printers.

When you have the right sticker paper and printer, print your stickers. That brings us to the next step.

Step-4: Use Self-Adhesive Laminating Sheets

This is the most important step to making your stickers waterproof. So, don’t make any mistakes in this step. You have to use self-adhesive laminating sheets to waterproof the stickers. There are two plastic films in the self-adhesive laminating sheets.

One of the sides of the film has adhesive materials. So, you have to place the sticker paper in the middle of the two films of the laminating sheet.

However, you need to make sure that the adhesive part of the film is on the upper side of the stickers so that it can seal the surface of the stickers to make them waterproof.

Step-5: Cut the Stickers

Now that you already have laminated the stickers with self-adhesive laminating sheets, you need to cut the stickers. Of course, you can cut them with scissors. But, I bet, you won’t want to take a risk with your stickers.

So, we recommend using the best cutting machine available on the market. Nonetheless, we recommend Cricut Explore Air 2 for this job. Because this machine will offer you a super simple precision cut in a very convenient way.

[su_highlight background=”#88dcf0″]Tips: Actually, the sticker-making process is the same regardless of the method you choose. So, whatever method you use, up to step 3 will be the same always. After printing the stickers, you can choose your preferred method for waterproofing them.[/su_highlight]

Method-2: Using Thermal Laminating Machine

Now, a thermal laminating machine is also an effective way. However, it will not make the stickers completely waterproof. To work on this method, firstly, you need to get a good quality thermal laminating machine.

In this case, my recommendation is the Fellowes Saturn 3i 125 Thermal Laminator Machine. I found this laminator quite effective and comes with a very user-friendly design.

Using a thermal laminating machine is quite easy.

Firstly, you need to wait for the light to turn on. There is a thermal laminating pouch. All you have to do is insert the printed sticker paper into that pouch.

That’s it. When the paper comes out of the machine, it will be laminated. After completing the laminating, you should cut the stickers.

Method-3: Applying a Sealant

Another good method of making your stickers waterproof is applying a sealant. I always recommend using an aerosol-based sealant for better output. You will end up getting a glossy or matte finish if you follow this method. The application process is quite straightforward.
1. Place the printed stickers on a surface.
2. Get an aerosol-based spray sealer.
3. Then apply the coat in a batch. You should do it slowly.
4. After applying the sealant, you have to wait at least 24 hours. This drying time is very important.
5. After the sealant is properly dried up, you need to cut the stickers the next day.
How to Make Waterproof Stickers without Sticker Papers

Yes, you can make waterproof stickers without using sticker paper. There are also two methods which are as follows.
- Method-1: Using wax paper and tape
- Method-2: Using laser-printed images
All of the methods are explained below in a detailed manner.

Method-1: Using Wax Paper and Tape

The following steps are included in this method.

Step-1: Print the Images

As you don’t have the sticker paper, you should print your selected images on a normal sheet. The sheet should be thick enough so that you can work with it easily. The images should be color printed. After that, you should cut the images in your preferred shape and size.

Step-2: Turn Images into Stickers

First, take wax paper and lay it on a surface. Then, you need to stick the tape on the surface of the wax paper. After that back of the tape, you need to attach the images with a glue stick.

Then, stick another layer of tap on the surface of the images. So, you have found your waterproof stickers here.

Step-3: Cut the Stickers

Cut the stickers by using a scissor. Finally, you need to remove the wax paper carefully so that you can use your newly made stickers.

Method-2: Using Laser Printed Images

In this method, you have to follow these steps.

Step-1: Laser Print Your Images

Choose your images and print them using laser printers very carefully.

Step-2: Stick Tape

Stick tape carefully on the surface of all of the images. Make sure that the surface of the images is completely covered.

Step-3: Soak them in Water

In this step, you need to soak the images in the water. Let them soak in the water for five minutes at least.

Step-4: Remove the back paper

After five minutes, you have to remove the back part of the images. Then dry them on wax paper. That’s it, your waterproof stickers are ready to use.

Frequently Asked Questions (FAQ)
- How can I make my stickers waterproof?
Answer: You can easily make your stickers waterproof. There are several methods to do that. You can use a self-adhesive laminating sheet which is quite easy to use.

It will seal your stickers properly. You can also use a thermal laminator. However, it will not make your stickers completely waterproof. Alternatively, an aerosol-based sealant can be used to get the job done.
- What paper do you need to make waterproof stickers?
Answer: To make waterproof stickers, you will need sticker paper so that you can print your design on it. To get the best level of user experience, you should always use printable vinyl sticker paper.
- Can you print your waterproof stickers?
Answer: Yes, you can print your waterproof stickers. To do that, you will need a vinyl inkjet printer in your home.
- Does Mod Podge make stickers waterproof?
Answer: No, Mod Podge can’t make stickers waterproof completely. It contains vinyl acetate. To be honest, using Mod podge can make stickers a little bit water-resistant, but it will not be completely waterproof.
- Do laminating stickers make them waterproof?
Answer: Yes, laminating stickers will make them waterproof. But, to make it completely waterproof, you should use self-adhesive laminating sheets. If you follow the thermal laminating method, it may not become completely waterproof.

Conclusion

Making stickers is an excellent art and many people love to do that. But, you should make your stickers waterproof so that they can sustain water damage.

There are several methods of waterproofing them. I hope after reading this write-up, you know well how to make waterproof stickers.
September 2, 2022
How to Waterproof Canvas Shoes- 2 Effective Ways
No one wants to let their favorite canvas shoes get wrinkled by rainwater or humidity. So for those who are comfortable to wearing canvas shoes, the best solution is to waterproof the shoes.

Nothing more, you should proceed with a wax or a waterproof spray. It really gives incredible results that will surprise you.

I was able to find two options for waterproofing canvas shoes, and I tested these options on of my shoes. Fortunately, I was able to protect my shoes from the water.

So without further ado let’s share my experience.

Method-1: Waterproof Canvas Shoes Using a Waterproofing Spray

What you need:
- Waterproof spray
- Cotton cloth
Step-1: Buy a good quality spray

To waterproof a canvas shoe you need to get a good brand of shoe waterproofing spray. However, most sprays generally do the same job. When you choose a spray, consider whether it contains silicone or acrylic polymer ingredients. These ingredients usually help repel water.

Step-2: Clean the shoes thoroughly

If your pair of shoes are used, clean them thoroughly and remove the laces. Make sure there is no dirt left in the shoes.

Step-3: Apply the spray

Select a ventilated area. A well-ventilated area is necessary to avoid exposure to harmful fumes from the spray. Place the spray can about 8 inches from the shoe and spray the entire shoe. Spray well into each corner of the shoe.

Step-4: Wipe off excess spray

Wipe off excess spray from shoes with a clean cotton cloth. Do this immediately after applying the spray and clean very lightly.

Step-5: Dry the shoes

It usually takes at least 30 minutes for the spray to dry, but it is best to dry them overnight.

Step-6: Re-spray

If you intend to apply multiple coats, allow the spray to dry thoroughly and apply a thin coat. You will repeat this procedure after using the pair of shoes several times.

Method-2: Waterproof Canvas Shoes Using a Beeswax

Waterproofing canvas shoes is easy with Beeswax. You can usually find wax at hardware stores but avoid colored wax.

Whatever you need:
- Beeswax
- Hair dryer
- Metal container
- Paint brush
Step-1: Clean shoes

If your shoes are dusty then nicely clean it. In that case, you can mix a mixture of 1 part vinegar and 1 part water. And clean the shoes well with a rag. Make sure no dirt remains. At this stage thoroughly dry it. Make sure your shoes are completely dry before proceeding to the next step.

Step-2: Test the wax

Testing the wax before applying it to the shoes is a good practice. That is, check how your chosen wax will stain the shoes. Therefore make a small mark on an invisible part of the shoe such as the heel or under the sidewall and see.

If the color of the wax blends smoothly into the shoes, it’s okay. Or you may need to change the wax.

Step-3: Rub the wax

Rub the wax well on the front and back of the shoe. Make a thick coating of wax. Make sure the wax is now visible on your shoe. It will disappear when you apply heat here, so not to worry.

Melt it with a hair dryer: At this point take a hair dryer and turn it on. Hold it close to the shoe and melt the wax. The higher its temperature, the faster the wax will melt.

Continue applying heat until the wax disappears. Repeat this process several times. You don’t have to wait long to waterproof canvas shoes with this method. You can wear them within 10 minutes.

Step-4: Add Melted Wax to Shoes

If you don’t want to rub the wax onto your shoes, you can do so by melting the wax. In this case, melt the waxes in a metal container, and place it in a container of hot water.

Now add your melted wax to the shoes with a paint brush. Work the wax well into every part of the shoe. Now heat the shoes with a hair dryer to melt the wax. Continue the process until the wax melt nicely. Allow it to dry for 5-10 minutes.

Which Option Should Be Chosen for Waterproof Canvas Shoes?

Waterproofing shoes with wax is a completely natural idea. This technique is eco-friendly and safe for you. So if you are looking for a natural solution then why not this one?

However, if you waterproof the shoes in this way, they may not breathe. This process will save you money, and if you have an emergency procedure, I would suggest you choose the wax technique. Because it takes less time to dry – you can wear the shoes within 10 minutes of applying the wax.

On the other hand, waterproof sprays are very easy to apply, but you need to take some precautions. Because most of the sprays contain flammable substances which are harmful to the environment and also dangerous to you.

However, to avoid risks, you should choose a ventilated place and take precautions. If you want to waterproof your shoes quickly and easily, definitely choose a waterproofing spray.

So, Now you know the details about the two ways so it’s just your decision how you want to waterproof your shoes.

Conclusion

Waterproofing canvas shoes will not only protect your shoes from water, but waterproofing is also a good idea to protect your shoes from dust and dirt.

Feel free to waterproof the shoes with the wax or spray and watch the spectacle. Proceed to any option as per your choice.
August 30, 2022
6 Effective Methods of How to Waterproof a Paper Easily
Waterproofing paper is necessary for various reasons like you want to collect some important documents or you want to keep a painting done by your child as a memory.

So, now the question is how to waterproof a paper? Luckily we were able to find it. There are some great paper waterproofing solutions that you can apply to make your cards, origami, and documents waterproof and durable.

So without further ado let’s know in detail about the methods of waterproofing paper.

How to Waterproof a Paper – 6 Methods

Method-1: Using Wax

Paper can be easily waterproofed using wax. This will help protect your paper from water, moisture, and dust. How to do this process-
Gather the materials:
- Wax (any type)
- Metal pot
- Paper
- Tongs
Step-1: Prepare Your Paper

Lay your paper out on a flat and dry surface. Make sure that there is no dirt or grain on the surface.

Step-2: Rub Wax on Paper

Rub the paper you want to waterproof well with wax. Continue this until you have a glossy wax coating on both sides of the paper. Make sure no part of the paper misses the layer of wax.

Avoid applying too much as the paper may tear. You can also waterproof cardboard boxes using this method.

Step-3: Apply Wax Coating on Paper by Dip Method

Usually, you need to spend more time waterproofing the paper with rub the wax. And rubbing wax to waterproof the paper is likely to tear your paper or cause the seal to be incomplete.

So you can follow this option to get better results in this process.

Take a metal pot and put some wax in it. Now melt the wax at medium temperature. When the wax melts well, this time to dip the paper in the container. and pick up the paper with a pair of tongs. Dry the wax coating thoroughly.

Step-4: Check the Paper Seal

Now test the wax when it has cured well on the surface of your paper Take 5 cups of water in a bowl. And dip the paper in water, now you must see the waterproof paper.

Method-2: Clear Nail Polish

The most economical and accessible method of waterproofing papers is to use clear nail polish.

What we need:
- Some clear nail polish
- Paint brush
- Paper
Step-1: Be Prepared and Safe

Nail polish contains acetone and toluene which are known to be toxic. So wear a mask and gloves when you are going to apply nail polish.

Step-2:Prepare the Paper and Drying Area

Consider the dust-free and ventilated area. and keep the paper on a flat surface.

Step-3: Apply Nail Polish to The Paper

Apply a thin layer of nail polish to the paper with a paint brush. Make sure each part is evenly coated.

Step-4: Dry the Paper

Now cure the paper thoroughly. It takes 20-30 minutes to dry.

Method-3: Using Mod Podge

Mod Podge is basically an adhesive or sealer, mainly acting as a protective finish. This product is very effective in protecting paper from dust, dirt, and water. Mod Podge is not completely waterproof but it is water resistant.

Collect the ingredients:
- Mod podge
- Paint brush
Step-1: Prepare the paper

Place the paper on the area where you want to do this waterproofing process. Ensure that the drying area is well-ventilated.

Step-2:Apply Mod Podge on paper

Take some amount of Modpodge and apply a thin coating on the paper with the paint brush. Add equal layers to each part.

Step-3:Dry It

Once the coating is well done, cure it at this stage. It usually takes one to two hours to dry.

Method-4: Using Alum

Alum is very effective in making your paper waterproof and durable. To do this you will need to create a solution.

What you will need:
- Alum
- Castile soap
- the water
- Gum Arabic
- the glue
- A flat tray
- Tongs
Step-1: Prepare the Paper and Drying Area

To waterproof your paper with this solution, you need to hang the paper to dry. And your paper should be clipped to the clothesline.
If the solution falls on the floor it can damage the floor. So spread a cloth or paper on the floor.

Step-2: Prepare the Water

Now heat 4 cups of water in a pot. At this stage mix alum (8 oz), castile soap (3 3/4 oz), gum arabic (2 oz) natural gum (4 oz) in hot water.

Step-3: Shake the Mixture Well

Stir the mixture well and mix all its parts evenly. Be careful not to boil the water, but the water should be hot. Prepare the mixture well.

Step-4: Cool the Mixture

Remove the solution from the heat and let it cool. Now pour the mixture onto a flat tray. Dip the paper in the solution: Dip the paper in the solution. When the paper is completely covered, pick it up with a pair of tongs. Make sure both sides of the paper are coated.

Step-5: Dry the Paper

At this stage dry the paper thoroughly. Hang the paper on a clothesline or string and fasten it with clips.

Method-5: Acrylic Sealer Spray or Waterproofing Spray

Waterproofing spray or Clear Acrylic Sealer Paint allows you to waterproof paper ideally. And sealers are easily procured and relatively inexpensive.

These products are very useful for giving a glossy and matte finish to the paper. One of the fastest and most reliable ways to waterproof paper is with a waterproofing spray.

Step-1: Collect the ingredients

Clear acrylic spray sealer or waterproofing spray Gloves (chemical-resistant rubber gloves).

Step-2: Prepare Yourself

Although sealing products are safe and user-friendly, they can be dangerous due to carelessness. So choose a ventilated area to apply these products. Wear goggles and gloves.

Step-3: Prepare the Paper

Place the paper you want to waterproof on a flat surface.

Step-4: Apply Spray to The Paper

Take the best quality waterproofing spray of your choice. Shake the spray can well. This time place the can about 10 inches from the paper and spray. Make sure every part of the paper is evenly coated.

Step-5: Dry the Paper

Dry the paper thoroughly. These sealers generally take 48 hours to dry.

Step-6: Re-Apply the Spray

When the paper is thoroughly dry, spray the other side of the paper in the same way. You can apply 2-3 coats for the best results.

Method-6: Using Wood Varnish

Wood varnish is a well-known and widely used product, usually used as a wood finish, but it is also very effective in waterproofing paper.

What you will need:
- Clear wood varnish
- Paintbrush
- Paper
Step-1: Choose a Place

After applying the varnish, choose a ventilated place to dry it. And make the place free of dust.

Step-2: Prepare Yourself

Wear a mask and gloves while doing this process. Because wood varnish can be toxic. Now place the paper on a clean, smooth hardboard.

Step-3: Apply Varnish to Paper

Place your paper on top of a piece of cardboard. Now take a paint brush and apply the varnish to the paper. Apply well to every corner of the paper.

Make sure that a thin coating of varnish is applied evenly to each part of the paper.

Step-4:Dry the paper

After applying the varnish to the paper, dry it thoroughly, it takes a full day to dry thoroughly.

Conclusion

In this article, you can find various ways of waterproofing methods for your paper. Whether you need to protect important documents or keep memories, these methods will help you do so.

By using wax, clear nail polish, or a waterproofing spray, you can waterproof your paper and keep it safe from water, moisture, and dust.
August 27, 2022
How to Waterproof a Camera – Effective Ways

If you are passionate about photography, most probably your favorite gadgets are cameras and related accessories. Having a camera is a great thing these days to capture your moments. But, the problem starts when it is a rainy season or you want to capture moments of your underwater activities.

That’s why it is quite important to make your camera waterproof. Now, if you don’t know how to waterproof a camera, worry no more. Because in this guide, I will take you on a tour where you will learn to waterproof your camera very easily.

So, without further ado, let’s begin.

How to Waterproof a Camera Easily

Why Should You Make Your Camera Waterproof?

It is common sense that if your camera comes into excessive water exposure, the lenses and internal mechanism can be damaged. Especially, when you are shooting during a rainy season, it becomes almost impossible to use the camera without making it waterproof.

Otherwise, your lenses and other accessories may receive an excessive amount of water exposure. Thus, it may ruin your day. Besides, if you love surfing, scuba diving, or doing any other underwater activities, you can’t capture any moments without making your camera waterproof.

Sometimes kids might want to take pictures of things underwater, swimming pool, or on a rainy day. If they ask to borrow your camera, you might worry that they‘ll drop it in the water and ruin it.

With a waterproof camera, you won‘t have to worry about that. In that case, You find it helpful to read the post about the Best Waterproof Underwater Camera For Kids.

Otherwise, you should take the necessary steps to protect your photography gadgets from water damage. Below I will give you some exclusive tips and ideas to waterproof your camera.

How to Waterproof a Camera: DIY Method

If you are a DIY enthusiast and love to fix things by yourself, you can follow these simple steps to get the job done.

Step 1- Take a Ziplock Bag:

First of all, you need to get a ziplock bag. These kinds of bags are easily available in any super shop or online store. Make sure that it fits well with the size of your camera. Whether you own a DSLR or other types of cameras, you should be able to find a ziplock bag of the required size.

Step 2- Cut a Small Hole in the Bag:

Get a sharp knife and cut a small hole on the opposite end of the bag where the zipper is not located.

Step 3- Insert the Camera into the Bag:

At this point, you have to insert the camera into the bag. Make sure that the lens part is on the side where you cut the hole.

Step 4- Stretch the Hole:

Now, you need to stretch the hole so that it can fit your lens size. Here is a simple warning. Don’t overdo it. Otherwise, you may have stretched more than you require for your lens.

Step-5- Use the Lens Hood:

Now cover the lens with the lens hood. Trust me, it is a very important step. If you don’t use the lens hood, your lens will be still vulnerable to water exposure.

Step 6- Close the Zipper:

Finally, it is time to close the zipper of your bag. Adjust the bag such that you can access all of the functionalities of the camera from the zipper’s side.

That’s it. By following these steps, you can easily make your camera waterproof and you won’t need to miss any memories even in the rainy season.

Alternative Ways for Camera Protection

If you are not a DIY guy and don’t want to go through the above-mentioned hassle, you can simply buy a protective housing case for your camera.

Sometimes, when I do surfing or diving, I also use a protective housing case so that my camera remains protected from water damage. There are different types of products available in the market.

But, I use DiCAPac WP-S10 Pro DSLR Camera Series Waterproof Case (view on Amazon). I use it when I use to dive with my underwater scooter.

This camera housing will literally fit all kinds of cameras. It will not only protect your camera underwater but also gives you access to all functionalities very easily.

However, if you want to take your phone with you while diving for capturing photos, you should make it waterproof as well. Many waterproof cases you can find on the market.

But I recommend YOGRE underwater photography housing case (view on Amazon).

This case is compatible with many models of iPhone and Samsung brands. You will get an excellent level of performance from it as it will completely waterproof your phone.

Wrapping Up!

Needless to say, making your camera waterproof is a necessary step you should take when it comes to doing photography in the rainy season. Besides, if you love underwater photography, it is a must-do thing.

If you follow these tips and tricks mentioned above, it will be very easy for you to keep your camera protected from water damage while having fun.

August 23, 2022
Waterproofing Your Exterior Walls: 10 Easy Steps

Moisture destroys both the durability and beauty of the wall. It will be frustrating for you when you see the wall of your house getting destroyed day by day due to moisture Prevention is wiser than cure.

Therefore, to protect your wall from outside dirt, moisture, and rainwater, taking preventive measures is the best solution. And luckily, you can protect your exterior wall from water and moisture by waterproofing it.

Now the question is, how do you waterproof the exterior wall? You can easily do this by following just a few steps. So without further delay check out the complete process. Here is our another guide about How To Waterproof A Basement Properly.

How To Waterproof Exterior Wall

In this article, we have arranged the process of how to waterproof your exterior wall in 10 steps. By following these steps, you will be able to ensure the protection of the wall very easily.

Step-1: Identify Exterior Wall Defects Thoroughly

The easiest solution to protect external walls from getting damp is to waterproof the walls. Mainly due to humidity, rainwater, and other structural reasons the external wall can become damp.

Identify wall defects such as cracks in bricks or burst water pipes. Take preventive measures if there is a problem. Generally, the wall may have a layer of dirt, so clean all the dirt and dust on the wall thoroughly. Ensure easy access to every edge of the wall.

Step- 2: Identify and Repair Wall Cracks

Before doing the waterproofing process, you need to prepare your wall. Generally, the cracks in the wall should be identified and filled.
Use hydraulic cement to fill the holes in the wall.

Our Recommendation:

DRYLOK 00917 Cement Hydraulic

Clean all the loose cement, and rough and uneven areas on the wall with sandpaper. And apply the hydraulic cement mixture into the cracks in the wall. and dry the wall thoroughly.

Step-3: Clean the Wall Nicely

The outer wall of the house is constantly exposed to various dirt, dust, and moisture and becomes dirty, so the wall must be completely cleaned before waterproofing.

You can take sandpaper to clean the stubborn dirt. Scrub the wall thoroughly with sandpaper and remove the dust with a broom or brush. Then clean with a power washer. Make sure there is no dirt left on the wall.

Step-4: Clean the Gutters

Water flows through your gutters, but if water accumulates in drains, the wood in your house can rot. Because Wood absorbs water easily. To avoid this damage, keep drains clean so that rainwater does not retain.

Step-5: Choose a Good Waterproofing

A good quality waterproofing product should be selected to protect the exterior wall from water and moisture. Choose the right waterproofing product depending on your wall type.

If you want to get some waterproofing like cement then get concrete waterproofing coating. This formula is suitable for any type of wall and provides a long-lasting solution.

There are also silicate-based concrete sealers, but these are suitable for unsealed walls. It is capable of producing better results than acrylic wall paint and provides a beautiful waterproof coating on the wall.

That is, you can choose from concrete waterproofing coatings, waterproofing paints, and silicate-based concrete sealers according to your needs.

Here is Our Recommendation:

Liquid Rubber Concrete Foundation and Basement Sealant

Best concrete waterproofing coatings

Ames BMX5RG Blue MAX Waterproofer

Best waterproofing paints

Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer

Best concrete sealers

However, one more thing to consider before choosing to waterproof is that the waterproofing you choose should help the walls breathe and retain moisture.

Step-6: Plaster Can Add Waterproofing Additives

A good solution is to choose a plaster waterproofing additive to add more strength to your waterproof wall. Plastering makes the wall more rigid and prevents moisture from entering. So you can protect the wall by adding a waterproofing compound to the plaster.

Step-7: Apply the Water-Proofer

Make sure the wall is fully prepared for applying the water-proofing formula. Take a brush or roller to do this process. This time, use the brush to thoroughly coat the waterproof formula. Apply in such a way that every part is evenly coated.

This time let the first coat dry well. For best results we recommend you to apply 2-3 coats. So after one coat dries well apply the next coat.

Step-8: Apply Tar and Heavy-Duty Membrane

So far your waterproofing job is complete, and now your wall is moisture and water resistant. However, more strength should be provided in the wall lowers. In that case, we recommend you use a tar-based pitch.

You can apply a heavy-duty plastic membrane to the wall to ensure extra protection. This membrane will protect your wall.

Step-9: Can Add a Grave

You need a foundation to place your drainage pipes, which can provide adequate protection to the pipes. In this case, you can add gravel.
Make a 2-3 inch flat gravel cover for the pipe. This provides long-lasting protection to the drainage pipe and covers the drainage holes.

Step-10: Test the Water Resistance

The waterproofing formula should be evaluated to see if it is able to protect your walls from water and moisture. In that case, after applying waterproofing to your wall, spray water on the wall when it dries.

Then, check if the wall is free of moisture, if the wall is free of moisture after spraying, then your chosen waterproofer is correct and effective.
Waterproofing the wall.

The most important and main ingredient in this process is waterproofing. So, make sure to choose a good quality waterproof product when waterproofing the wall.

Waterproof your wall by following the above process completely.

August 21, 2022
How To Make Your Eyebrows Waterproof Easily: 2 Methods
Undoubtedly, eyebrows enhance the beauty of your face. So whether you go to a party with your friends or travel somewhere far away, we recommend you to do eyebrows.

But waterproofing is the best solution if you are joining a pool party or if you have oily skin or if you want to be out in the sun a lot.
Waterproofing your brows will help protect your brows from sweat and water.

So let’s take a look at how to waterproof your eyebrows.

Making Your Eyebrows Waterproof: 2 Methods

Following are 2 effective ways to waterproof your eyebrows. Follow the tricks and make your brow waterproof very easily.
- Method-1: Using a waterproof eyebrow pencil and gel to waterproof the brows.
- Method-2: Waterproof the brows using waterproof mascara.
Using Waterproof Eyebrow Pencil and Gel to Waterproof the Brows

Step-1: Start with An Oil-Absorbing Powder

Generally, makeup melts off very quickly on oily skin. Therefore, it is a good idea to use an oil-absorbing setting powder after finishing your face makeup. This product prevents your makeup from melting and also prevents makeup from fading and smudging.

So consider a good quality oil-absorbing powder. And gently apply the powder to the face with a makeup brush or sponge, and blend the powder into the skin. Pay special attention to the brows area.

Read this If you also want to learn How to Make Your Regular Mascara Waterproof in 5 Minutes.

Step-2: Apply a Waterproof Eyebrow Pencil to The Brows

Choose a waterproof eyebrow pencil to waterproof your brows. Waterproof eyebrow pencil protects your eyebrow makeup from sweat and water and is easy to use.

Fill in your brows the same way you regularly groom your brows. Identify your ideal brow and mark it with a pencil. Now shape the eyebrows according to the shape of your face. And fill in the eyebrows well. Be careful not to make your eyebrows too dark or too light.

Step-3: Apply an Eyebrow Gel

After filling in your brows you can set them with a brow gel. This will make your eyebrows look more natural and beautiful. Brow gel keeps your brows smudge-proof and waterproof. It’s best to use a gel to give the brows a soft, glossy matte look.

If you don’t have eyebrow gel, you can use petroleum jelly, a clean mascara brush, and hairspray or make-up setting spray to seal your brows. Add a light coat of brow gel with a mascara comb or nail polish brush.

Waterproof the Brows Using Waterproof Mascara

Step-1: Eyebrows with A Waterproof Pencil/gel/marker

Consider a waterproof formula to avoid sweat and waterproof eyebrows. Fill in the brows with a waterproof brow pencil. In that case, finish your makeup and use an oil-based face powder before using the pencil.

Now create an ideal eyebrow shape according to your face shape and fill in the brows with a waterproof pencil.

Step-2: Set with Waterproof Mascara

Using mascara is a great way to waterproof your brows. This product will protect your brows from water and sweat, and help make your brow smudge-proof.

Also, provide a glossy look. Mascara is very effective in making your brows last longer. Once your brows are done, gently apply a coat of mascara to the brows with a mascara comb. And wait until it dries.

Step-3: Apply a Finishing Spray

Using a finishing spray essentially completes your makeup. Sealing your brows with a finishing spray is a great idea to keep your makeup long-lasting and waterproof.

You can use your hair spray to give your brows the finishing touch. To do this, take some spray on your palm or brush and hold it along your eyebrows. That’s it. Now, This process helps keep your brows stunning and smudge-proof all day long.

Things to Consider in Choosing Makeup Products for Eyebrows

Consider the popular eyebrow products to get waterproof eyebrows. The most popular eyebrow filling products are eyebrow powder, eyebrow gel, and eyebrow pencil. Among these products, eyebrow gel will help you get long-lasting eyebrows.

Consider good quality eyebrow makeup products. Check the material and verify the waterproof label. There are several products you use to get the job done.

But, in my opinion, a good quality waterproof eyebrow pencil can be the best choice here. Lots of products in this eyebrow pencil category are available in the market. But I always use L’Oreal Paris waterproof eyebrow pencil.

After selecting eyebrow products you must know the proper use of these products. If you apply eyebrow makeup with the right technique, your eyebrows will stay beautiful for a long time and will not fade.

What to Follow in Doing Eyebrow Makeup?
- You can start with an eyebrow primer before filling in your brows. This will protect your brow makeup from burning and washing off.
- Use concealer around your brow area. This will help brighten your entire eye area.
- Finally set the brows with a brow gel.
Conclusion

There is no doubt that if your eyebrows are not smudge-proof, you may face some embarrassing moments. That’s why you should take all the necessary steps to make your eyebrows waterproof.

If you follow the above-mentioned steps properly, I hope you can waterproof your eyebrows very easily.
August 20, 2022