Your favorite wooden furniture can be damaged by exposure to water. And when these valuable things are Damaged, it becomes very difficult to cure.
As a result, you should not allow wooden furniture to perish. In that case, taking waterproof measures may be a good decision. Fortunately, we’ve been able to find some clever ways to waterproof your wood.
In this article, you will find some easy ways to waterproof your wood. So let’s take a look.
HOW TO WATERPROOF WOOD
Method-1: Using Coconut oil
What we need:
- Coconut oil
- Paint Brush or cloth.
Coconut oil can be a unique solution for naturally refreshing or restoring wood. This ingredient keeps your wood supple and acts as a conditioner for the wood. Moisturizes and revitalized the dull wood as a result of your daily use.
Clean the wood: Thoroughly clean the wood surface with a soft damp towel or cotton cloth. If there is stubborn dirt on the wood, make sure it is clean.
Dry the wood: After thoroughly cleaning the wood surface, dry it.
Rub coconut oil: At this stage, you rub a little coconut oil on the wood surface with the help of a brush or cloth.
Method-2: Using Sealant
What we need:
- Sealant.
- Sand paper
- Paint Brush.
Sealant is a reliable and popular method of waterproofing wooden furniture. Purchase a water-based wood sealer.
Clean the wood surface: Rub the wood well with a sand paper and level the wood. Now remove the wood residue with a brush.
Apply sealant to the wood: Take a paint brush.
Now spray the sealant product on the wood. And brush the sealant with the paint brush. Make sure that the sealant has been applied evenly on the whole wood.
Dry and apply another coat: It usually takes 4-10 hours for the sealant to dry. When the product dries well, apply a second coat.
If you want to get a better and shiny finish then you can apply another sealant coat.
Method-3: Linseed, Walnut, and Tung
What we need:
- Linseed oil or walnut oil or tung oil.
- Apple cider vinegar
- Turpentine
- Sandpaper
- Cotton cloth.
Linseed, walnut, and tung oil are very popular for waterproofing your wood. You can supply linseed oil from any DIY store. This oil gives off a strong odor but it dries nicely forever. And it is completely safe to use.
However, this oil is mainly found in both raw and boiled linseed. Raw linseed oil is used for medicinal purposes. And boiled linseed oil is used for the sealant. Boiled linseed oil is toxic because it contains metallic drying ingredients.
As a result, it is allowed to be used in various outdoor equipment. However, keep in mind that boiled linseed oil does not contain petroleum. If you have collected raw linseed oil, you can boil the oil.
Tung oil is relatively expensive so it is recommended to use it in your small wood projects. You can buy walnut oil from any grocery store.
Consider which oil you want to use for your project. Then buy oil according to the size of your project.
Make a mixture: Make a strong sealant for wood application. In this case, take turpentine and apple cider vinegar. Take one part oil and half apple cider vinegar and one part turpentine to make the mixture. This mixture is able to give a little durable finish to your wood.
Prepare the wood: Rub the wood surface with sandpaper and level the wood. Now clean the wood. Clean it well with a dry cloth. Make sure there is no dirt left on the wood.
Apply the oil mixture to the wood: Take a clean cotton cloth. This time pour a small amount of oil mixture. Coat the oil well on the wood surface with a cotton cloth.
Dry the first coat: Dry the oil mixture. And remove the excess oil from the wood. It takes 20-30 minutes to dry the oil.
Apply the oil again: Make sure that the first coat is well cured. At this stage, apply another coat of oil to the wood. For best results, you can apply 3 coats. Heal the wood completely and then use it.
Method-4: Olive oil and lemon
What we need:
- Olive oil
- Lemon
- Cloth
The combination of olive oil and lemon can be a great way to protect your wood.
Make a mixture: Take olive oil (3 parts) and lemon juice (2 parts) in a bowl. Mix the mixture well. When the mixture is ready, pour it in a spray bottle.
Clean the wood: Thoroughly clean the wood that you want to cure.
Apply the mixture to the wood: At this stage spray the mixture on the wood surface and rub with a cloth
Dry the wood: Let the wood dry well, and then use.
Conclusion:
In this article, you will learn how to waterproof wooden furniture and hopefully, you can do it easily now. Each of the above solutions are very simple and gives excellent results. Then follow any of these procedures and protect your wood from water and other harmful elements.
